USE :
This valve allows the oil arriving at C 1 from the stem to be recovered and sent to the bottom through the port P, adding it to the pump flow rate.
When the pressure in the bottom of the cylinder reaches the calibration value, the oil arriving from the stem is sent to the tank through the port Vl, thus restoring a non-regenerative system with maximum thrust.
The regenerative cut-off pressure depends only on the pressure in the cylinder head.
MATERIALS AND FEATURES :
Body: galvanized steel.
Internal components: heat-hardened and ground steel.
Seals: BUNAN standard.
Tightness: negligible leakage.
ASSEMBLY :
Connect Cl to the cylinder stem, VI to the supply, P simultaneously to the cylinder base and to the supply and M to the pressure gauge if present.
REGENERATING VALVE VRSP are interchangeable with:
