In this category we collect the articles that accurately help the operator in determining the dimensions of the gasket seats and the gaskets themselves.
Applying proven methods to determine size will save short-term time, frustration and additional costs.
In O-rings the most important dimensions are the internal diameter and the cross section.
The articles that make up this category are:
DGT BORLETTI CDJ15 CALIBER 150X40. Clear display, 12 mm high numbers / Measuring range: 153 mm / Resolution Vernier: 0.01 mm / External tips: 40 mm, internal tips: 16 mm / Dimensions: 235 mm
BOTTOM MEASUREMENT CALIPER HOLLOW 0-300mm. This gauge is designed to detect the internal diameter of the groove, the bottom of the groove. Depending on the depth of the gasket holder, long or short arms can be used.
1.Slot depth minimum 3/16"(5mm)-maximum 3/8"(10mm).
2.Hole width:minimum 9/16"(15mm)-maximum 12"(300mm)
definition:1/128"(0.05mm).
GAUGE MEASUREMENT BOTTOM HOLLOW 5/10/15/150. This gauge is designed to detect the internal diameter of the groove, the bottom of the groove. Depending on the depth of the gasket holder, long or short arms can be used.
1.Slot depth minimum 3/16"(5mm)-maximum 3/8"(10mm).
2.Hole width:minimum 9/16"(15mm)-maximum 6"(150mm)
definition:1/128"(0.05mm).
CALIPER-MEASURER FOR TAPES. This article is used to make guide rings from tape, with high precision, follow the video to understand how it works.
CONE ALLM.x OR METRIC D.005x050 mm
CONE ALLM.x OR METRIC D.051x100 mm
CONE ALLM.x OR METRIC D.101x150 mm
CONE ALLM.x OR METRIC D.151x20 mm
This series of metal cones allows the measurement of the internal diameters of the gaskets and o-rings in mm, the steps have a precision of 1 mm.
MEASURING CONE x OR INCH-INCH. This cone allows measurement of o-rings in inches in 184 dimensions. strings 1.78/2.62/3.53/5.34/6.99
The dimensional references are present on the raised cone.
GAUGE x OR--13" mm 330. This sliding gauge can measure the internal diameter of an o-ring up to 13 inches. The references are for o-rings in inch strings 1.78/2.62/3.53 /5.34/6.99.
MEASURING TAPE 100-700 MM / MEASURING TAPE 50-300 MM. These two tapes are used to measure and detect the internal and external diameters of o-rings and gaskets in both inches and millimeters.
They differ from each other in the range of measurable dimensions.
Measurement are interchangeable with:
